Small and Compact

Perfect for Product Integration

TED-96 was created to be used in products or projects after development has been done on the TIMI-96 module, where a permanent installation is required. TIMI-96 was designed as a flexible design aid, primarily to simulate components readouts and meters, which would otherwise be cumbersome or demanding on hardware resources for breadboard or electronic development. Simulating component readouts allows accelerated development and retains the often-limited GPIO hardware associated with many developments. TED-96 then steps in after this development has been done, for integration into a product.

Pixxi-28 Graphics Processor

Powered by an embedded graphics processor which hosts built-in services to view high-quality widgets, images, icons and even video.​

0.96″ Full Colour RGB-IPS Display
Wrapped in a sleek metal frame, TED-96 can be viewed at any angle. Boasting a full RBG (65K vivid colors) display with 160×80 resolution.​
16MB Flash for Graphics Assets

On-board 16MB flash memory for all the graphical widgets, images and animations.​

Simple 2×6 Pin Configuration

Integration into a product is made simple with a castellated and through-hole pad combination.

TED-96 Features

TED-96’s main interface is a 3.3V level Asynchronous Serial UART and features 6 GPIO (3 more than TIMI-96) which can be used as Digital or Analog inputs, Digital Outputs, Master I2C Communication or PWM Audio output. These interfaces arm TED-96 with resources to be either a stand-alone controller, a Host driven slave, or a tethered test instrument, while being capable of interfacing and powering external devices itself.

  • Powered by 4D Labs Pixxi-28 Graphics Processor.
  • 160×80 pixel resolution TFT LCD (non-touch).
  • 3.3V (5V tolerant) serial UART interface (300 to 2187500 Baud).
  • Master I2C (3.3V level) interface bus.
  • 6 GPIO (3.3V level): 2 analog or I2C, 1 PWM Audio.
  • 16MB Flash Memory.
  • 32KB of Processor Flash Memory.
  • 14KB of Processor SRAM for User Variables.
  • 5Vdc supply input (3.3V possible).
  • Dedicated 3.3V 500mA power output for User.
  • Breadboard compatible pin headers (0.1” / 2.54mm).
  • RoHS and REACH compliant.
  • PCB is UL 94V-0 Flammability Rated.
  • Weight approx. 5.0 grams.

Mates Studio

Software Development Suite for TED-96

COMMANDER

The Commander environment enables the user to create projects by selecting page layouts from predesigned user interfaces from the Breadboard Mates team and community.

ARCHITECT

The Architect environment enables the user to design projects with custom pages and widgets. This gives more designing capabilities than the Commander environment.

GENIUS

The Genius environment enables the user to design projects with custom pages and widgets and write code. This removes the need for an external host to control the display.

BUILDER

The Builder environment enables projects with custom pages and widgets and builds the process flow using graphical/block programming, removing the need for an external host to control the display.

TED-96 Resources

Datasheets
Projects
Tutorials
User Manuals

Order Now

TED-96

What's in the Box:

  • TED-96
  • Metal Box Package

Note: If this is your first time using TED-96, we highly recommend you purchase the Starter Kit as the Programmer will be essential for all development work.

$29.00

Add to cart

Starter Kits and Accessories

  • TED-96 Starter Kit

    What’s in the Box:

    • TED-96
    • Mates Programmer
    • Metal Box Package

    Note: If this is your first time using TED-96, we highly recommend you purchase the Starter Kit as the Programmer will be essential for all development work.

    $39.00

    Add to cart
  • Pi Adaptor

    This adaptor provides a standard Raspberry Pi with a MatesBUS interface to connect products of any TIMI model directly to the Raspberry Pi bus.

    $14.00

    Add to cart
  • MB Adaptor

    This adaptor provides any board that supports the mikroBUS socket with a MatesBUS interface to connect any TIMI model directly.

    $9.00

    Add to cart
  • Mates Stand

    The Mates Stand is an aluminium stand with integrated PCB designed to provide a base platform for MatesBUS based products for development or showcasing.

    Note: the TIMI display is not included.

    $25.00

    Add to cart

Related Products