Small and Compact
Perfect for Product Integration
TED-130X was created to be used in products or projects after development on the TIMI-130X module, where a permanent installation is required. TIMI-130X was designed as a flexible design aid to simulate components readouts and meters, which would otherwise be cumbersome or demanding on hardware resources for breadboard or electronic development. Simulating component readouts allows accelerated development and retains the often-limited GPIO hardware associated with many developments. TED-130X then steps in after this development has been done for integration into a product.
TED-130X’s main interface is a 3.3V level Asynchronous Serial UART and features 14 GPIO (11 more than TIMI-130X), which can be used as Digital or Analog inputs, Digital Outputs, Master I2C Communication, or PWM Audio output. These interfaces arm TEDX-130 with resources to be either a stand-alone controller, a Host-driven slave, or a tethered test instrument while being capable of interfacing and powering external devices itself.
- Powered by 4D Labs Pixxi-44 Graphics Processor
- 240(W)x240(H) resolution TFT IPS LCD, non-touch
- 3.3V (5V tolerant) Serial UART interface, capable of 300 to 2187500 Baud
- Master I2C (3.3V level) interface bus
- 14 GPIO (3.3V level), 4 capable of Analog, and 1 pair as I2C
- 32MB of External SPI Flash Memory
- 32KB of Processor Flash Memory
- 30KB of Processor SRAM for User Variables
- Single supply 5V power input (*3.3V possible – See ‘System Pins’ Section)
- Dedicated 3.3V 500mA power output for User
- Standard 0.1” (2.54mm) pitch castellated and through hole pads
- RoHS and REACH compliant
- PCB is UL 94V-0 Flammability Rated
- Weight approx. 7.0 grams
Software Development Suite for TED-130X
The Commander environment enables the user to create projects by selecting page layouts from predesigned user interfaces from the Breadboard Mates team and community.
The Architect environment enables the user to design projects with custom pages and widgets. This gives more designing capabilities than the Commander environment.
The Genius environment enables the user to design projects with custom pages and widgets and write code. This removes the need for an external host to control the display.
The Builder environment enables projects with custom pages and widgets and builds the process flow using graphical/block programming, removing the need for an external host to control the display.