Small and Compact

Perfect for Product Integration

TED-130X was created to be used in products or projects after development on the TIMI-130X module, where a permanent installation is required. TIMI-130X was designed as a flexible design aid to simulate components readouts and meters, which would otherwise be cumbersome or demanding on hardware resources for breadboard or electronic development. Simulating component readouts allows accelerated development and retains the often-limited GPIO hardware associated with many developments. TED-130X then steps in after this development has been done for integration into a product.

PIXXI44 Graphics Processor
Powered by an embedded graphics processor which hosts built-in services to view high-quality widgets, images, icons and even video.​
Pixxi-28 Graphics Processor

Powered by an embedded graphics processor which hosts built-in services to view high-quality widgets, images, icons and even video.​

2.5″ TFT IPS LCD display with Capacitive Touch
Boasting a full RBG (65K vivid colours) TFT IPS LCD with 240(W)x240(H) resolution and Capacitive Touch.
1.3″ Full Colour RGB-IPS Display
Wrapped in a sleek metal frame, TIMI can be viewed at any angle. Boasting a full RBG (65K vivid colors) IPS display with 240×240 resolution.​

TED-130X Features

TED-130X’s main interface is a 3.3V level Asynchronous Serial UART and features 14 GPIO (11 more than TIMI-130X), which can be used as Digital or Analog inputs, Digital Outputs, Master I2C Communication, or PWM Audio output. These interfaces arm TEDX-130 with resources to be either a stand-alone controller, a Host-driven slave, or a tethered test instrument while being capable of interfacing and powering external devices itself.

  • Powered by 4D Labs Pixxi-44 Graphics Processor
  • 240(W)x240(H) resolution TFT IPS LCD, non-touch
  • 3.3V (5V tolerant) Serial UART interface, capable of 300 to 2187500 Baud
  • Master I2C (3.3V level) interface bus
  • 14 GPIO (3.3V level), 4 capable of Analog, and 1 pair as I2C
  • 32MB of External SPI Flash Memory
  • 32KB of Processor Flash Memory
  • 30KB of Processor SRAM for User Variables
  • Single supply 5V power input (*3.3V possible – See ‘System Pins’ Section)
  • Dedicated 3.3V 500mA power output for User
  • Standard 0.1” (2.54mm) pitch castellated and through hole pads
  • RoHS and REACH compliant
  • PCB is UL 94V-0 Flammability Rated
  • Weight approx. 7.0 grams

Mates Studio

Software Development Suite

COMMANDER

The Commander environment enables the user to create projects by selecting page layouts from predesigned user interfaces from the Breadboard Mates team and community.

ARCHITECT

The Architect environment enables the user to design projects with custom pages and widgets. This gives more designing capabilities than the Commander environment.

GENIUS

The Genius environment enables the user to design projects with custom pages and widgets and write code. This removes the need for an external host to control the display.

BUILDER

The Builder environment enables projects with custom pages and widgets and builds the process flow using graphical/block programming, removing the need for an external host to control the display.

TED-130X Resources

Datasheets
Projects
Tutorials
User Manuals

Order Now

TED-130X

What's in the Box:

  • TED-130X
  • Metal Box Package

Note: If this is your first time using TED-130X, we highly recommend you purchase the Starter Kit, as the programmer will be essential for all development work.

$42.00

Add to cart

Starter Kits and Accessories

  • TED-130X Starter Kit

    What’s in the Box:

    • TED-96
    • Mates Programmer
    • Metal Box Package

    Note: If this is your first time using TED-96, we highly recommend you purchase the Starter Kit as the Programmer will be essential for all development work.

    $52.00

    Add to cart
  • Pi Adaptor

    This adaptor provides a standard Raspberry Pi with a MatesBUS interface to connect products of any TIMI model directly to the Raspberry Pi bus.

    $14.00

    Add to cart
  • MB Adaptor

    This adaptor provides any board that supports the mikroBUS socket with a MatesBUS interface to connect any TIMI model directly.

    $9.00

    Add to cart
  • Mates Stand

    The Mates Stand is an aluminium stand with integrated PCB designed to provide a base platform for MatesBUS based products for development or showcasing.

    Note: the TIMI display is not included.

    $25.00

    Add to cart

Related Products